Loading ...
You stand to gain a lot of benefit when you have an effective parquet flooring refinishing. For starters, you will be able to restore the glamor. The intricacy that comes with the beautifully arranged wood planks makes this type of floor a winner. When you want to redo the floor, the top layer of the gloss should be removed. This is to protect the wood from staining.
This is a good way to restore your shiny floor. If you do not know how to go about it on your own, then you need to consult a professional. If you have the urge to do it yourself, make sure you understand how to go about it. Make sure that you retain the intricacy of the floor. The way you sand is key to achieving success on the finishing.
Parquet floors have a bit of complications even when it comes to professionals. This is because the grains of the wood are spread in all directions because of this intricate arrangement. You should first focus on replacing only the top coat. It is a good idea never to deep sand the floor until when you have adequate machinery. Make sure the machine you get can sand the floors in all grain directions at once.
Make sure you prepare well. Begin by freeing the floor of any obstructions. Before you attempt to redo it, make sure it is as clean as possible. It could be a great idea to remove the entire furniture from the room before the work begins. In addition, you should remove all the floor trim. This could be done using a hammer and flat bar. Be careful not to crack the trim.
No nails should be left sticking out as they could cause many obstructions. Importantly, clean using warm water and a bit of dishwashing liquid. It is vital never to leave any water standing on the floor as it may result to staining or destroying a good portion of your floor.
You may begin sanding the floors to remove the entire top gloss. Do not sand all the way down to the grain unless you are using an orbital sander. You could find one for rent. This ensures that you get the finest possible results. Make sure you start by using a coarse sandpaper and move on to a finer one when you are done. This ensures that the floor remains smooth. After you are done, remove the dust by vacuuming your floor. What you see should be a dull floor free of any glossiness.
Begin from the farthest corner of the room. Use lambswool for the application. You may pour it along the wall then pull it with the applicator. The coat should be thin and even. Make sure no bubbles form. Give it a day to dry before moving to the next step.
Before the second coat is applied, use fine sandpaper to hand buff the coat. This is to make sure the second coat will stick well. The dust that comes off this should be removed before the second coat is applied. Repeat this step for the third and final coat, but do not sand it this time. Allow it to dry before you restore the trim. After it has dried, your parquet flooring refinishing will be complete.
